资源环境系列制图研究的现实基础与发展     

苏时雨  苏映平 《云南地理环境研究》1991,3(2):9-16

本文侧重于全国性资源环境及有关自然条件等专题制图工作的现实基础和成就,作简要总结和回顾。针对提高和重新认识制图效益和重点进行讨论,提出科学效益是基础,社会效益是目的,经济效益是根本,为资源环境的合理开发利用提供依据,并提出今后发展设想。  相似文献   

Compaction of a Rock Fracture Moderated by Competing Roles of Stress Corrosion and Pressure Solution   总被引：1，自引：0，他引：1  

Hideaki Yasuhara  Derek Elsworth 《Pure and Applied Geophysics》2008,165(7):1289-1306

Unusually rapid closure of stressed fractures, observed in the initial stages of loading and at low temperatures, is examined using models for subcritical crack growth and pressure solution. The model for stress corrosion examines tensile stress concentrations induced at the Hertzian contact of propping fracture asperities, and mediates fracture growth according to a kinetic rate law. Conversely, pressure solution is described by the rate-limiting process of dissolution, resulting from the elevated stresses realized at the propping asperity contact. Both models are capable of following the observed compaction of fractures in novaculite. However, closure rates predicted for stress corrosion cracking are orders of magnitudes faster than those predicted for pressure dissolution. For consistent kinetic parameters, predictions from stress corrosion better replicate experimental observations, especially in the short-term and at low temperature when mechanical effects are anticipated to dominate. Rates and magnitudes of both stress corrosion and pressure solution are dependent on stresses exerted over propping asperities. Rates of closure due to stress corrosion cracking are shown to be always higher than for pressure solution, except where stress corrosion ceases as contact areas grow, and local stresses drop below an activation threshold. A simple rate law is apparent for the progress of fracture closure, defined in terms of a constant and an exponent applied to the test duration. For current experimental observations, this rate law is shown to replicate early progress data, and shows promise to define the evolution of transport properties of fractures over extended durations.  相似文献   

郯庐断裂带安徽段现代地震活动及应力场特征   总被引：7，自引：6，他引：7       下载免费PDF全文

刘东旺  夏瑞良  刘泽民  沈小七  李敏莉  闫素萍 《地质科学》2006,41(2):278-290

分析了郯庐断裂带安徽段地震活动特征,利用近震直达波最大振幅比方法反演了99次中-小地震震源机制,并作了统计和聚类分析。现代地震活动整体上继承了历史地震分布格局,未显示增强趋势;断裂带及邻区应力场P轴和T轴优势方位大致呈近东西向和近南北向分布,现今承受的作用力以近水平或斜向为主,但也存在部分其它方向的应力场和近垂直方向的作用力。震源断层的破裂类型,带内以逆冲(或正断),或近逆冲(或正断)型为主。带附近较明显地呈现出走滑型或近走滑型破裂的优势;北、南亚段应力场有明显差异,即北压南张,其分界大约在北纬32°附近,北西西走向的桥头集—东关断裂是两者间的构造变换带。  相似文献   

巴姆地震变形场和应力场：Ⅱ．用FEPG有限元方法求解   总被引：2，自引：0，他引：2  

罗扬施旭  赵永红 《岩石学报》2006,22(9):2375-2380

本文利用 FEPG 有限元程序对2003年12月的巴姆地震变形场和应力场进行了模拟计算。2003年12月26日,巴姆地区发生6.6级地震。Nakamura、Suzuki 等人利用余震资料和地震破坏程度的分布图分析了余震震中的统计分布形式,得到了此次地震的发震断层是巴姆断层以西大约5km 的 Arg-e-Bam 隐伏断层的结论。凌勇等人从差分干涉雷达(D-InSAR)出发,得到了此次地震的同震干涉条纹和雷达视线方向的位移场,并从雷达干涉的相干图上确定了发震断层的痕迹。他们还利用 Okada 程序模拟计算了此次地震的位移场,模拟计算的结果与 D-InSAR 测量的位移场比较符合。Okada 程序从断层的位错为出发点进行计算,从运动学角度对此次地震变形场和应力场进行研究;本文从动力学的角度出发,研究远场区域边界的应力状态以及断层的物性参数的变化对巴姆地震形变场的影响,将各种计算结果进行对比的同时也和前人的结果相比较。本文计算中采用了凌勇等人的断层参数,即 Arg-e-Bam 隐伏断层为近南北走向,向东倾斜,近直立的倾角,右旋走滑,其(Strike,dip,slip)为(175°,80°,173°)。断层未延伸到地表,自地面以下1km 处往下延伸16km 的宽度,断层长度为20km。对断层的杨氏模量、泊松比、断层附近区域的边界受力大小、两个主应力的比例以及主应力的方向的改变对计算结果的影响做了讨论。最后通过上述几组计算结果建立了一个与前人结果较为符合的巴姆地震参数模型。通过计算,一方面揭示了应力状态和物性参数的影响,另一方面也说明 Arg-e-Bam 隐伏断层是此次地震的发震断层这一结论是可信的。  相似文献   

郯庐断裂带(安徽段)及邻区的动力学分析与区域构造演化   总被引：11，自引：3，他引：11       下载免费PDF全文

侯明金  朱光  Jacques Mercier  Pierre Vergély  王永敏 《地质科学》2007,42(2):362-381

依据区域构造层次划分,采用构造筛分法,层层深入,层层筛分,确定发生于各个不同时代地层/岩层内的断裂活动的同期及叠加的应力场特征。综合所有的同期应力场特征及辅以叠加的应力场特征来验证,从而确定了一个连续的、完整的断裂活动的应力场演化序列;结合区域构造变形特征分析,阐明郯庐断裂带(安徽段)的构造演化。应力场分析显示:晚三叠-早侏罗世应力场为北北西—南南东或近南北向挤压,属古特提斯构造域,断裂发生同造山走滑;早白垩世早期,应力场为北西—南东向挤压,断裂发生左行走滑运动,中国东部处于西环太平洋构造域;早白垩世晚期—古新世(始新世),区域发生北西—南东向伸展作用,断裂处于伸展断陷作用阶段;新生代,受区域上近东西向的挤压作用影响,断裂发生挤压逆冲兼右行走滑作用。  相似文献   

压实粉土非线性应力-应变关系的试验研究     

彭丽云  刘建坤  肖军华  陈立宏  朱瑞龙 《工程地质学报》2007,15(1):50-55

对京九线路基粉土用GDS三轴仪进行固结不排水剪试验,研究不同围压、含水量、压实度下压实粉土样的应力-应变关系。结果表明:压实粉土在低围压下为应变软化,高围压下为应变硬化,存在一个屈服应力;含水量和压实度对粉土强度和应力-应变关系影响显著,随着含水量的减小、压实度的增大,压实粉土样强度增大,应力-应变曲线上升。对围压小于屈服应力的应变软化曲线,用常规的土的软化关系式进行拟和;对围压大于屈服应力的应变硬化曲线,用邓肯-张模型进行拟和;这二者的结合能描述压实粉土的应力-应变关系曲线,效果良好。  相似文献   

巴姆地震变形场和应力场：Ⅰ．用差分干涉雷达和Okada方法求解   总被引：1，自引：0，他引：1  

凌勇 曾祺明罗扬  赵永红 《岩石学报》2006,22(9):2367-2374

本文对2003年12月26日伊朗东南部克尔曼省巴姆地区发生的6.6级地震产生的位移场、应变场和应力降分布进行了定量研究。首先从差分干涉雷达(D～InSAR)出发,求解出此次地震的同震干涉条纹和雷达视线方向的位移场,并从雷达干涉的相干图上清楚的观察到了发震断层的痕迹,得出此次地震的发震断层是巴姆断层以西的隐伏断层的结论。然后结合 Harvard 的 CMT(震源机制解)结果、Nakamura 的断层结果(Arg-e-Bam 隐伏断层)以及本文 D-InSAR 求解出的发震断层结果,利用 Okada 程序,计算出此次地震的北、东、垂向三个位移分量,投影得到雷达视线方向的位移,将投影结果与由 D-InSAR得到的位移场比较,看到我们所讨论的断层模式可以很好的解释差分干涉雷达的观测结果,可以合理的解释 Arg-e-Bam 隐伏断层为此次地震的发震破裂断层,通过分析地震的破坏程度分布图,隐伏断层为发震断层的解释可以很好的符合巴姆地震的等震分布图。最后,本文利用 Okada 程序计算得到了此次地震所产生的应变场和应力降场。  相似文献   

Source parameters of intermediate-depth Vrancea (Romania) earthquakes from empirical Green's functions modeling     

Adrien Oth  Friedemann Wenzel  Mircea Radulian 《Tectonophysics》2007,438(1-4):33-56

Several source parameters (source dimensions, slip, particle velocity, static and dynamic stress drop) are determined for the moderate-size October 27th, 2004 (M_W = 5.8), and the large August 30th, 1986 (M_W = 7.1) and March 4th, 1977 (M_W = 7.4) Vrancea (Romania) intermediate-depth earthquakes. For this purpose, the empirical Green's functions method of Irikura [e.g. Irikura, K. (1983). Semi-Empirical Estimation of Strong Ground Motions during Large Earthquakes. Bull. Dis. Prev. Res. Inst., Kyoto Univ., 33, Part 2, No. 298, 63–104., Irikura, K. (1986). Prediction of strong acceleration motions using empirical Green's function, in Proceedings of the 7th Japan earthquake engineering symposium, 151–156., Irikura, K. (1999). Techniques for the simulation of strong ground motion and deterministic seismic hazard analysis, in Proceedings of the advanced study course seismotectonic and microzonation techniques in earthquake engineering: integrated training in earthquake risk reduction practices, Kefallinia, 453–554.] is used to generate synthetic time series from recordings of smaller events (with 4 ≤ M_W ≤ 5) in order to estimate several parameters characterizing the so-called strong motion generation area, which is defined as an extended area with homogeneous slip and rise time and, for crustal earthquakes, corresponds to an asperity of about 100 bar stress release [Miyake, H., T. Iwata and K. Irikura (2003). Source characterization for broadband ground-motion simulation: Kinematic heterogeneous source model and strong motion generation area. Bull. Seism. Soc. Am., 93, 2531–2545.] The parameters are obtained by acceleration envelope and displacement waveform inversion for the 2004 and 1986 events and MSK intensity pattern inversion for the 1977 event using a genetic algorithm. The strong motion recordings of the analyzed Vrancea earthquakes as well as the MSK intensity pattern of the 1977 earthquake can be well reproduced using relatively small strong motion generation areas, which corresponds to small asperities with high stress drops (300–1200 bar) and high particle velocities (3–5 m/s). These results imply a very efficient high-frequency radiation, which has to be taken into account for strong ground motion prediction, and indicate that the intermediate-depth Vrancea earthquakes are inherently different from crustal events.  相似文献   

Relocation of aftershocks, focal mechanisms and stress inversion: Implications toward the seismo-tectonics of the causative fault zone of Mw7.6 2001 Bhuj earthquake (India)   总被引：2，自引：0，他引：2  

P. Mandal  S. Horton   《Tectonophysics》2007,429(1-2):61-78

The HYPODD relocation of 1172 aftershocks, recorded on 8–17 three-component digital seismographs, delineate a distinct south dipping E–W trending aftershock zone extending up to 35 km depth, which involves a crustal volume of 40 km × 60 km × 35 km. The relocated focal depths delineate the presence of three fault segments and variation in the brittle–ductile transition depths amongst the individual faults as the earthquake foci in the both western and eastern ends are confined up to 28 km depth whilst in the central aftershock zone they are limited up to 35 km depth. The FPFIT focal mechanism solutions of 444 aftershocks (using 8–12 first motions) suggest that the focal mechanisms ranged between pure reverse and pure strike slip except some pure dip slip solutions. Stress inversion performed using the P and T axes of the selected focal mechanisms reveals an N181°E oriented maximum principal stress with a very shallow dip (= 14°). The stress inversions of different depth bins of the P and T axes of selected aftershocks suggest a heterogeneous stress regime at 0–30 km depth range with a dominant consistent N–S orientation of the P-axes over the aftershock zone, which could be attributed to the existence of varied nature and orientation of fractures and faults as revealed by the relocated aftershocks.  相似文献   

Earthquake generation in Cyprus revealed by the evolving stress field     

Eleftheria E. Papadimitriou  Vassilios G. Karakostas   《Tectonophysics》2006,423(1-4):61

Strong earthquake occurrence (M ≥ 6.0) onshore and offshore the Cyprus Island constitutes significant seismic hazard because they occur close to populated areas. Seismicity is weak south of the Island along the Cyprean Arc and strong events are aligned along the Paphos transform fault and Larnaka thrust fault zone that were already known and the Lemessos thrust fault zone that defined in the present study. By combining the past history of strong (M ≥ 6.0) events and the long-term tectonic loading on these major fault zones, the evolution of the stress field from 1896 until the present is derived. Although uncertainties exist in the location, magnitude and fault geometries of the early earthquakes included in our stress evolutionary model, the resulting stress field provides an explanation of later earthquake triggering. It was evidenced that the locations of all the strong events were preceded by a static stress change that encouraged failure. The current state of the evolved stress field may provide evidence for the future seismic hazard. Areas of positive static stress changes were identified in the southwestern offshore area that can be considered as possible sites of future seismic activity.  相似文献